Sunline Heat Pumps
Aquatech Dynamic X8 268L Heat Pump Hot Water System — 268L R290 heat pump hot water system
268LTank
COP 4.4Efficiency
42 dBSound
5 yrWarranty
AquatechAll-in-oneR290 Sunline pick

Aquatech Dynamic X8 268L Heat Pump Hot Water System

Model Dynamic X8 · Straight swaps from an old electric tank

Aquatech X-series · pick your size

What are you replacing?

$1,521$3,145$1,624 off

Fully installed in VIC · rebates already off

No obligation · We reply within one business hour

The maths

Where $1,624 of your price disappears

Three separate VIC incentives stack on this unit when you're replacing a electric storage. We lodge every form — you never chase paperwork or wait on a cheque.

How the rebates work
RRP before rebates$3,145
Solar Victoria rebate$1,000

Interest-free loan option too

Federal STCs$624

19 certificates

VEECs$0

Depends on the unit you're replacing

You pay, installed$1,521

Running costs

About $1,234 a year back in your pocket

Based on a four-person Victorian household — roughly 4,500 kWh of water heating a year at 30c/kWh. At a COP of 4.38, this unit only needs about 1,027 kWh to do the same job. Run it on the timer through the middle of the day and most of that comes off your roof, not the grid.

Got rooftop solar?

Time the heat pump to soak up your daytime output

70%
All gridTypical timer: 60–80%All solar

Every kWh you self-consume is worth 30c instead of the 3c feed-in you'd get for exporting it — that's the solar saving baked into the numbers below.

Old electric storage tank$1,350/yr
Gas storage hot water$780/yr
Aquatech Dynamic X8 on grid power$308/yr
Aquatech Dynamic X8 + solar timer$116/yr

Your estimated hot water bill

$116/ year

down from $1,350 on an old electric tank

$1,234

Saved per year vs electric

$664

Saved per year vs gas

1.2 yrs

Payback after rebates

3.3 t

CO₂ avoided per year

Over 10 years

$12,338

Estimate only — your actual bill depends on tariff, climate zone, solar system size and how much hot water the household chews through.

Spec sheet

Every number, straight off the data plate

Manufacturer-published figures. Anything we can't verify is shown as a dash rather than guessed.

Key specifications
Model
Aquatech DYNAMIC/X8
Tank capacity (stored / heated)
268 L / 263 L
Suits household
4–6 people
Refrigerant
R290 (400 g)
Sound level
42 dB(A) at 1.65 m
Net dimensions
620 mm dia × 1800 mm H
Packed dimensions
700 × 700 × 1950 mm
Weight (empty / packed / full)
118 / 134 / 378 kg
Standing heat loss
Polyurethane 40 mm · 2.8 kWh loss per 24 hrs
Swap footprint
Fits the footprint of an electric 400L
Warranty
5 yrs full system replacement · 2 yrs labour
Electricity supply
220–240 V / 50–60 Hz
Circuit
10 amp, single phase
Power connection
Hardwired / isolated
Tariff
Continuous, shoulder or time-of-use
Compressor
GMCC Toshiba rotary · 700–900 W
Backup element
1800 W flange element (Robert Shaw thermostat)
Refrigerant
R290 natural · 3000 kPa · GWP 3
Heat exchanger
Microchannel aluminium alloy
Tank
Carbon steel · Blue Diamond vitreous enamel (Class X)
Anode
Non-sacrificial impressed current
Anti-corrosion
Suits soft and hard water — no anode swaps
Protection class
IPX4
Max temp (heat pump / element)
60°C / 70°C
Ambient range (heat pump / element)
-5°C to 43°C / -15°C to 50°C
Controller
LCD with Wi-Fi (Tuya app)
Water connections
3/4" G · 850 kPa PTR supplied
Tank & sizing
Tank capacity
268 L
Suits household
4-6 people

Aquatech DYNAMIC/X8

A no-fuss swap that just gets on with it

Engineered by Aquatech Solar Technologies in Australia, the X-series runs R290, a GMCC Toshiba rotary compressor and a Blue Diamond enamel tank with an impressed-current anode — so there's no anode rod to swap out down the track. Fits the footprint of an electric 400L

5-year full system replacement warranty · 2 years labour

Five controller modes

Eco
60°C set · 2.50 kW/cycle

Factory default. Heat pump only, element never fires — cheapest way to run it day to day.

Standard
60°C set · 2.50 kW/cycle

Higher trigger temp so a cycle is more likely to land inside your solar or off-peak window.

Hybrid
65°C set · 3.38 kW/cycle

Heat pump to 60°C, element lifts the last 5°C. One cycle a day covers a small-to-medium house.

Hybrid+
70°C set · 4.30 kW/cycle

Stores the most hot water in a single daytime run — the pick for solar homes with big usage.

Element
70°C set · 9.99 kW/cycle

Element only. A stopgap if the heat pump needs a service — pricey to run, so don't leave it there.

01

R290 natural refrigerant

Global warming potential of 3, next to nothing. No synthetic gas phase-down hanging over it down the track.

02

Wi-Fi controller & app

Tuya-based app on the LCD controller — set modes, timers and target temp from the couch or the pub.

03

Impressed current anode

Non-sacrificial anode powered by the unit, so there's no anode rod to replace every few years. Handles soft and hard water.

04

Straight electric swap

The X6 drops into an electric 250L footprint and the X8 into a 400L — usually no new slab, no re-plumbing gymnastics.

05

Built-in solar timers

Timer windows default to 9am–6pm so the unit heats on your rooftop solar instead of buying peak power.

06

1800 W standby element

If the compressor ever plays up, the element keeps hot water coming until a tech gets out to you.

Performance by air temperature (wet bulb)

Air tempCOPCapacityL/hrFull recovery
0°C2.51500 W30 L8 hr 40 min
7.5°C3.52125 W45 L5 hr 55 min
15°C4.382950 W62 L4 hr 15 min
20°C5.093450 W73 L3 hr 35 min

Manufacturer figures for a 15°C to 55°C temperature rise. Melbourne sits around the 7.5–15°C wet bulb band most of the year.

Certified to Australian Standards

  • AS 2712:2007 — Solar & heat pump design
  • AS 3498:2009 — Legionella control
  • AS 60335.2.40 — Electrical safety
  • AS 4020 — Potable water quality
  • AS 5125 — Heat pump performance
  • AS 4692 — Tank heat loss

Straight talk

Our honest take on Aquatech

What we rate
  • 5-year full system replacement warranty — not just parts
  • Impressed-current anode means no anode rod to replace
  • R290 refrigerant with Wi-Fi control and solar timers
  • Fits the footprint of the electric tank it replaces
Worth knowing
  • Labour cover stops at 2 years
  • Heat pump only runs to -5°C before the element steps in
  • Tuya app is functional rather than flash

How it happens

From quote to hot water in about a week

01

Quick chat

Tell us what you're replacing and where it sits. Fixed price back the same day.

02

Rebate paperwork

We check eligibility and lodge Solar Victoria, STCs and VEECs for you.

03

Install day

Old unit removed, new one plumbed and wired. Usually done inside a day.

04

Aftercare

Warranty claims and servicing handled through us — one number to ring.

Owners

What Victorians say

"Swapped our old electric tank. The bill dropped straight away and the crew sorted every rebate form."

Sarah M. · Melbourne

"Reckoned it'd struggle in winter — it doesn't. Water's hot on frosty mornings and you can barely hear it."

James T. · Geelong

"Price was exactly what was quoted. No surprises, rebates applied upfront. Easy."

Priya K. · Ballarat

FAQs

Questions we get asked

Want this one at $1,521 installed?

Send us a couple of details and we'll confirm your rebate eligibility and lock the price in writing. No sales pressure, no obligation.

Compare models
Back to all products

Fully installed · incl. rebates

$1,521