Sunline Heat Pumps
Powerbay Gen II 250L Inverter Heat Pump Hot Water System — 250L R290 (340 g) heat pump hot water system
250LTank
COP 4.7Efficiency
46 dBSound
5 yrWarranty
PowerbayAll-in-oneR290 (340 g)

Powerbay Gen II 250L Inverter Heat Pump Hot Water System

Model PBG2-250RE-HYBRID · Inverter tech and R290 at the sharpest price

Powerbay Gen II · pick your size

What are you replacing?

$1,118$3,490$2,372 off

Fully installed in VIC · rebates already off

No obligation · We reply within one business hour

The maths

Where $2,372 of your price disappears

Three separate VIC incentives stack on this unit when you're replacing a electric storage. We lodge every form — you never chase paperwork or wait on a cheque.

How the rebates work
RRP before rebates$3,490
Solar Victoria rebate$1,000

Interest-free loan option too

Federal STCs$680

17 certificates

VEECs$692

Depends on the unit you're replacing

You pay, installed$1,118

Running costs

About $1,242 a year back in your pocket

Based on a four-person Victorian household — roughly 4,500 kWh of water heating a year at 30c/kWh. At a COP of 4.73, this unit only needs about 951 kWh to do the same job. Run it on the timer through the middle of the day and most of that comes off your roof, not the grid.

Got rooftop solar?

Time the heat pump to soak up your daytime output

70%
All gridTypical timer: 60–80%All solar

Every kWh you self-consume is worth 30c instead of the 3c feed-in you'd get for exporting it — that's the solar saving baked into the numbers below.

Old electric storage tank$1,350/yr
Gas storage hot water$780/yr
Powerbay PBG2-250RE-HYBRID on grid power$285/yr
Powerbay PBG2-250RE-HYBRID + solar timer$108/yr

Your estimated hot water bill

$108/ year

down from $1,350 on an old electric tank

$1,242

Saved per year vs electric

$672

Saved per year vs gas

0.9 yrs

Payback after rebates

3.3 t

CO₂ avoided per year

Over 10 years

$12,424

Estimate only — your actual bill depends on tariff, climate zone, solar system size and how much hot water the household chews through.

Spec sheet

Every number, straight off the data plate

Manufacturer-published figures. Anything we can't verify is shown as a dash rather than guessed.

Key specifications
Model number
PBG2-250RE-HYBRID
Series
Gen II Inverter hybrid all-in-one
Tank capacity
250 L
Suits household
3–4 people
Rated heating capacity
2.65 kW
Rated input power
0.56 kW
COP
4.73 (air 20°C, water 15→55°C)
Backup element
2.1 kW / 9.2 A
Max running current
15 A
Net dimensions
Ø650 × 1950 mm
Packed dimensions
735 × 2115 × 735 mm
Net / gross weight
108 / 138 kg
Warranty
5 yrs tank replacement · 2 yrs heat pump parts
Power supply
220–240 V / 50 Hz, single phase
Refrigerant
R290 / 340 g (natural, GWP 3)
Compressor
AI-controlled inverter
Heat exchanger
Microchannel wrapped around the tank
Inner tank
Enamel-lined thick carbon steel with magnesium anode
Water inlet / outlet
DN20 (G3/4" internal thread)
Max tank pressure
1,000 kPa
Relief valve
850 kPa (500 kPa PLV required on the cold inlet)
Rated outlet temperature
60°C
Max outlet temperature
70°C
Ambient range (heat pump only)
-7°C to 45°C
Design ambient range
20°C to 45°C
Weather rating
IPX4
Noise at 1 m
46 dB(A)
Standards
AS/NZS 3498:2020, AS/NZS 4417 RCM, AS/NZS 60335.1:2020, AS/NZS 2712:2007
Tank & sizing
Tank capacity
250 L
Suits household
3–4 people

Powerbay Gen II Inverter

Inverter smarts without the premium price tag

The Gen II runs an AI-controlled inverter compressor, so it ramps output to suit the house instead of banging on and off. 2.65 kW of heat from just 0.56 kW of power — a COP of 4.73 — on 340 g of R290 natural refrigerant. Microchannel exchanger wrapped around an enamel-lined tank, IPX4 rated, and it keeps pulling heat from the air down to -7°C.

COP 4.73 · R290 · 46 dB(A) · Wi-Fi app

Three operating modes

Standard mode
The factory default. Heat pump runs first, then the element finishes the job once the compressor hits its limit. Set and forget for most homes.
Eco mode
Heat pump only — the element stays out of it. Cheapest way to run the tank, and the pick if you've got solar heating during the day.
Hybrid mode
Heat pump and element together for the quickest recovery. Handy for a full house or a cold snap. Reverts to Standard after 24 hours.

Warranty

TankReplacement warranty — a 500 kPa pressure limiting valve must be fitted on the cold inlet
5 years
Heat pump parts
2 years
01

AI-controlled inverter

Variable-speed compressor that reads demand instead of banging on and off. Steadier water temperature and less power drawn on a mild Melbourne day.

02

COP up to 4.73

2.65 kW of heat from 560 W of power on the 200L and 250L (2.35 kW on the 300L) — around 75% less power than an old resistive electric tank.

03

R290 natural refrigerant

340 g of propane with a global warming potential of 3, instead of the synthetic gases in the thousands that plenty of brands still run.

04

Weekly sterilisation cycle

After seven days of running, the unit automatically lifts the tank to knock off any bacteria or legionella. No button to press.

05

Built to last the distance

Enamel-lined thick carbon steel tank with a magnesium anode, tested through 250,000 pulsation cycles, IPX4 rated for outdoors.

06

Wi-Fi app control

Full control from your phone — modes, target temperature, schedules and unit status, so you can shift heating onto your cheap power window.

The Gen II range side by side

ModelTankSuitsCOPSize (Ø × H)
PBG2-200RE-HYBRID200 L1–3 people4.73Ø650 × 1890 mm
PBG2-250RE-HYBRID250 L3–4 people4.73Ø650 × 1950 mm
PBG2-300RE-HYBRID300 L4–6 people4.2Ø650 × 2030 mm

Powerbay's tank warranty requires a 500 kPa pressure limiting valve on the cold inlet — we fit one on every install as standard, so your cover stays intact.

Straight talk

Our honest take on Powerbay

What we rate
  • AI-controlled inverter compressor, not the old on-off design
  • COP 4.73 on the 200L and 250L, on 340 g of R290
  • Weekly automatic sterilisation cycle and Wi-Fi app control
  • 5-year tank replacement warranty, 250,000-cycle tested
Worth knowing
  • 46 dB(A) — louder than the quiet leaders
  • Labour cover is short compared with the premium brands
  • Tank warranty needs a 500 kPa PLV fitted on the inlet

How it happens

From quote to hot water in about a week

01

Quick chat

Tell us what you're replacing and where it sits. Fixed price back the same day.

02

Rebate paperwork

We check eligibility and lodge Solar Victoria, STCs and VEECs for you.

03

Install day

Old unit removed, new one plumbed and wired. Usually done inside a day.

04

Aftercare

Warranty claims and servicing handled through us — one number to ring.

Owners

What Victorians say

"Swapped our old electric tank. The bill dropped straight away and the crew sorted every rebate form."

Sarah M. · Melbourne

"Reckoned it'd struggle in winter — it doesn't. Water's hot on frosty mornings and you can barely hear it."

James T. · Geelong

"Price was exactly what was quoted. No surprises, rebates applied upfront. Easy."

Priya K. · Ballarat

FAQs

Questions we get asked

Want this one at $1,118 installed?

Send us a couple of details and we'll confirm your rebate eligibility and lock the price in writing. No sales pressure, no obligation.

Compare models
Back to all products

Fully installed · incl. rebates

$1,118